SUP-DFG split ultrasonic liquid level gauge is a digital liquid level gauge controlled by microprocessor. By sensor The ultrasonic pulse generated by (transducer) is sent out in the measurement. After the surface acoustic wave is reflected by the same sensor or ultrasonic receiver receiving the liquid, the piezoelectric crystal or magnetostrictive device converts the transmitted and received acoustic wave into electrical signal to calculate the time between the sensor surface and the measured liquid. Due to the non-contact measurement, the measured medium is almost unlimited, It can be used to measure the height of various liquid and solid materials. Characteristic measurement range: 0 ~ 50m blind area: ＜ 0.3-2.5m (different ranges) accuracy: 1% F.S power supply: 220V AC + 15% 50Hz (optional: 24VDC)
| Product |
Ultrasonic level transmitter |
| Model |
SUP-DFG |
| Measure range |
5m、10m、15m、20m、30m、40m、50m |
| Blind zone |
＜0.3-2.5m（different for range） |
| Accuracy |
1% |
| Display |
LCD |
| Output (optional) |
Four-wire 4～20mA/510Ωload |
|
Two-wire 4～20mA/250Ω load |
|
2 relays (AC 250V/ 8A or DC 30V/ 5A ) |
| Temperature |
LCD: -20～+60℃; Probe: -20～+80℃ |
| Power supply |
220V AC+15% 50Hz(Optional: 24VDC) |
| Power consumption |
<1.5W |
| Protection degree |
IP65 |
| Cable Probe |
Standars:10m longest:100m |